![background image](http://html.mh-extra.com/html/stihl/ms-251/ms-251_instruction-manual_1378777039.webp)
MS 251, MS 251 C
English
37
Versions with Easy2Start
WARNING
This machine is extremely simple and
easy to start, even for children.
To reduce the risk of serious or fatal
injury:
–
do not allow children or other
unauthorized persons to attempt to
start or otherwise use the machine
–
never allow children or
unauthorized persons access to the
machine
–
never leave the machine
unattended while working or during
work breaks
–
after work, store in a safe, secure
location out of the reach of children
and other unauthorized persons
Positions of Master Control lever
Stop 0 – engine off – the ignition is
switched off
Normal run position (
F
) – engine runs or
can fire.
Starting throttle (
n
) – this position is
used to start a warm engine. The Master
Control lever moves to the normal run
position as soon as the throttle trigger is
squeezed.
Choke shutter closed (
l
) – this position
is used to start a cold engine.
Setting the Master Control Lever
To move the Master Control lever from
the normal run position (
F
) to choke
closed (
l
), press down the throttle
trigger lockout and squeeze the throttle
trigger at the same time and hold them in
that position – now set the Master
Control lever.
To select the starting throttle
position (
n
), move the Master Control
lever to choke closed (
l
) first, then
push it into the starting throttle
position (
n
).
The Master Control lever must be in the
choke closed position (
l
) for the
changeover to the starting throttle
position (
n
).
The Master Control lever moves from
the starting throttle position (
n
) to the
run position (
F
) when you press down
the throttle trigger lockout and blip the
throttle trigger at the same time.
To switch off the engine, move the
Master Control lever to Stop (0).
Choke shutter closed (
l
)
–
if the engine is cold
–
If the engine stalls when you open
the throttle after starting.
–
If the fuel tank was run until empty
(engine stopped).
Starting throttle position (
n
)
–
If the engine is warm, i.e. if it has
been running for about one minute.
–
when the engine begins to fire.
–
after clearing a flooded combustion
chamber.
Starting / Stopping the
Engine
STOP
0
001BA140 KN
Summary of Contents for MS 251
Page 2: ...Instruction Manual 1 61 Manual de instrucciones 62 127 ...
Page 130: ...MS 251 MS 251 C español EE UU 128 ...
Page 131: ......