95
MS 171, MS 181, MS 211
14.9.2 Fuel Intake Hoses
– Remove the carburetor,
b
14.3
– Remove the pickup body,
b
14.9.1
:
Disconnect the fuel hose from the
carburetor carrier (arrow).
:
Pull off the elbow connector (1)
with fuel hose (2).
:
Pull the fuel hose (1) off the
elbow connector (2).
:
Pull the fuel hose (1) out of the
fuel tank.
533RA399 TG
1
2
1
2
533RA415 TG
533RA416 TG
1
:
Inspect fuel hoses (1+2) and
elbow connector (3) and replace
if necessary.
:
Push the fuel hose (1) through
the hole (arrow) in the fuel tank.
:
Line up the fuel hose (1) and
press it into the housing bore until
its flange is positioned as shown
(arrow) and is flush with the
housing.
– Coat with STIHL Press Fluid,
b
16
1
2
3
533RA417 TG
533RA418 TG
1
533RA419 TG
1
:
Use the hook 5910 893 8800 to
pull the fuel intake hose (1) out of
the fuel tank.
Do not overstretch the fuel hose.
– Install the pickup body,
b
14.9.1
– Close the tank cap.
:
Push the fuel hose (1) onto the
elbow connector as far as stop,
making sure the slot (arrow)
engages the lug (2).
Ensure there is no gap between the
connector and fuel hose.
533RA420 TG
1
1
2
533RA422 TG
All manuals and user guides at all-guides.com
all-guides.com