73
MS 171, MS 181, MS 211
– Push the baffle (1) onto the studs
and position it in the filter base.
:
Fit the nuts (arrows) and tighten
them down firmly.
– Reassemble all other parts in the
reverse sequence.
Tightening torques,
b
3.5
14.3
Removing and Installing
the Carburetor
– Remove the filter base,
b
14.2
– Open the tap cap and drain the
fuel tank. Collect fuel in a clean
container.
Remove the carburetor only when
the tap can is open.
– Remove the handle molding if
necessary,
b
12.2
– Disconnect the choke rod,
b
14.6
– Set Master Control lever to “
0
“
533RA193 TG
1
Machines with manual fuel pump
:
Pull the fuel hose (1) off the stub
(arrow).
:
Pull off the carburetor, and pull
stub (arrow) out of fuel hose at
the same time.
– Check the carburetor and repair
or replace if necessary.
Sleeve (1) must be in place.
1
533RA259 TG
533RA295 TG
533RA238 TG
1
– Push the carburetor into position.
:
When pushing the carburetor into
position, check that the stub (1) is
properly seated in the fuel hose
(arrow).
Machines with manual fuel pump
:
Push the fuel hose (1) onto the
stub (arrow).
– Attach the choke rod,
b
14.6
– Reassemble all other parts in the
reverse sequence.
– Tightening torques,
b
3.5
533RA296 TG
1
1
533RA297 TG
All manuals and user guides at all-guides.com
