135BA011 KN
► Guide the drive link into the bar groove (see
arrow) and turn the tensioning gear to the left
as far as possible
► Fit chain sprocket cover, sliding the guide lugs
into the engine housing openings
4
5
2310BA018 KN
When fitting the chain sprocket cover, the teeth
of the adjusting wheel and the tensioning gear
must mesh; if necessary,
► turn the adjusting wheel (4) a little until the
chain sprocket cover can be slid completely
against the engine housing
► Swing grip (5) into position (until it engages)
► Fit wing nut and tighten lightly
► Next step: see "Tensioning the Saw Chain"
8
Mounting the Bar and
Chain (side chain ten‐
sioner)
8.1
Removing the chain sprocket
cover
143BA034 KN
► Unscrew nuts and remove chain sprocket
cover
1
2
001BA185 KN
► Turn screw (1) to the left until the tensioner
slide (2) butts against the left end of the hous‐
ing slot
8.2
Releasing the chain brake
001BA186 KN
► Pull hand guard towards the front handle until
it engages audibly – chain brake is released
English
8 Mounting the Bar and Chain (side chain tensioner)
18
0458-206-0121-C
Summary of Contents for MS 170
