![background image](http://html1.mh-extra.com/html/stihl/mm-56/mm-56_instruction-manual_1379357017.webp)
MM 56 C
English
15
Controls
1
Throttle Trigger Lockout
2
Throttle Trigger
3
Stop switch with Run and Stop
positions. Depress the stop switch
(
…
) to switch off the ignition – see
"Function of stop switch and ignition
system".
Function of stop switch and ignition
system
The ignition is switched off and the
engine stopped when the stop switch is
depressed. The stop switch returns
automatically to the Run position when it
is released: The ignition is switched on
again after the engine stops – the engine
is then ready to start.
Starting the Engine
N
Swing bicycle handle into working
position – see "Adjusting the Bicycle
Handle"
N
Depress the manual fuel pump
bulb (4) at least five times – even if
the bulb is filled with fuel.
Cold engine (cold start)
N
Depress the choke knob (5) and
turn it to
g
at the same time.
Warm engine (warm start)
N
Depress in the choke knob (5) and
turn it to
<
at the same time.
Also use this setting if the engine has
been running but is still cold.
Cranking
N
Retract the wheels, if fitted.
N
Put the unit on the ground: It must
rest securely on the engine flange
and the support on the frame.
Check that the MultiTool is not
touching the ground or any other
Starting / Stopping the
Engine
1
0000-GXX-0538-A0
2
3
0000-GXX-0540-A0
4
0000-GXX-0539-A0
5
0000-GXX-0541-A0
5
0000-GXX-0545-A0
Summary of Contents for MM 56
Page 2: ...Instruction Manual 1 30 Manual de instrucciones 31 66 ...
Page 69: ...MM 56 C español EE UU 67 ...
Page 70: ...MM 56 C español EE UU 68 ...
Page 71: ......