![background image](http://html1.mh-extra.com/html/stihl/mm-56/mm-56_instruction-manual_1379357010.webp)
MM 56 C
English
8
For tools used to cut grass, trim and
prune, remove the gearbox.
Use for:
–
FS-MM brushcutter
Check the instruction manual for the
MultiTool to ensure you are using the
appropriate deflector for that MultiTool.
For specific starting instructions, see the
appropriate section of your MultiEngine
and MultiTool manuals.
Starting
Start the engine at least 10 feet (3 m)
from the fueling spot, outdoors only.
For specific starting instructions, see the
appropriate section of your MultiEngine
and MultiTool manuals.
Place the power tool on firm ground or
other solid surface in an open area.
Maintain good balance and secure
footing.
WARNING
Always stand to one side of the unit to
avoid the risk of injury from contact with
the rotating working tool.
WARNING
Once the engine has started,
immediately blip the throttle trigger,
which should release the starting throttle
and allow the engine to slow down to
idle.
WARNING
Your power tool is a one-person
machine. Do not allow other persons in
the general work area, even when
starting.
Stop the engine and working tool
immediately if you are approached.
To reduce the risk of eye and other injury
always wear proper eye protection (see
section on "Proper Clothing") and
ensure that bystanders are at least
16 feet (5 m) away. To reduce the risk of
damage to property, also maintain this
distance from such objects as vehicles
or windows. Any coworkers who must be
in the restricted area should also wear
goggles or protective glasses.
WARNING
To reduce the risk of injury from loss of
control, do not attempt to "drop start"
your power tool.
WARNING
When you pull the starter grip, do not
wrap the starter rope around your hand.
Do not let the grip snap back, but guide
the starter rope to rewind it properly.
Failure to follow this procedure may
result in injury to your hand or fingers
and may damage the starter
mechanism.
See also the safety precautions on
Starting in the instruction manual of the
MultiTool.
To reduce the risk of
injury from loss of control,
be absolutely sure that
the working tool is clear
of you and all other
obstructions and objects,
including the ground,
because when the engine
starts at starting-throttle,
engine speed will be fast
enough for the clutch to
engage and move the
working tool.
0000-GXX-0545-A0
5m (16ft)
Summary of Contents for MM 56
Page 2: ...Instruction Manual 1 30 Manual de instrucciones 31 66 ...
Page 69: ...MM 56 C español EE UU 67 ...
Page 70: ...MM 56 C español EE UU 68 ...
Page 71: ......