MM 55, MM 55 C
English
12
Before fueling, clean the filler cap and
the area around it to ensure that no dirt
falls into the tank.
Always thoroughly shake the mixture in
the canister before fueling your
machine.
In order to reduce the risk of burns or
other personal injury from escaping gas
vapor and fumes, remove the fuel filler
cap carefully so as to allow any pressure
build-up in the tank to release slowly.
After fueling, tighten fuel cap as securely
as possible by hand.
Operating elements
1
Throttle trigger lockout
2
Throttle trigger
3
Slide control
Slide control positions
4
START – Start – the ignition is
switched on – the engine can be
started
5
Operating position
F
– Run – engine
is running or can start
6
STOP
-
0 – engine off – ignition is
switched off
Symbol on slide control
7
h
– Stop sign and arrow – to switch
off the engine, push the slide control
in the direction of the arrow (
h
) to
STOP
-
0
Starting
N
Fold out bicycle handle in working
position – see "Adjusting the bicycle
handle"
N
Press the throttle trigger lockout and
throttle trigger in succession
N
Hold both triggers down
N
Move the slide control to START
and hold it in position too
N
Release the throttle trigger, slide
control and throttle trigger lockout in
succession = starting throttle
position
N
Set the choke lever (8)
Fueling
232BA046 KN
Starting / Stopping the
Engine
1
4
5
6
7
3
START
2
STOP
002BA036 KN
8
469BA033 KN
9
