background image

Contents

1

KombiSystem..............................................2

2

Guide to Using this Manual.........................2

3

Safety Precautions and Working Techni‐

ques............................................................ 3

4

Approved KombiTools.................................7

5

Mounting the Loop Handle..........................7

6

Mounting the Bike Handle...........................8

7

Adjusting the Throttle Cable......................10

8

Fuel........................................................... 11

9

Fueling...................................................... 12

10 Starting / Stopping the Engine.................. 12

11 Operating Instructions...............................15

12 Replacing the Air Filter..............................15

13 Adjusting the Carburetor........................... 15

14 Spark Plug................................................ 15

15 Storing the Machine.................................. 16

16 Maintenance and Care..............................17

17 Minimize Wear and Avoid Damage...........18

18 Main Parts.................................................19

19 Specifications............................................19

20 Maintenance and Repairs......................... 20

21 Disposal.................................................... 20

22 EC Declaration of Conformity................... 21

23 UKCA Declaration of Conformity.............. 21
Dear Customer,
Thank you for choosing a quality engineered

STIHL product.
It has been built using modern production techni‐

ques and comprehensive quality assurance.

Every effort has been made to ensure your satis‐

faction and trouble-free use of the product.
Please contact your dealer or our sales company

if you have any queries concerning this product.
Your

Dr. Nikolas Stihl

1

KombiSystem

In the STIHL KombiSystem a number of different

KombiEngines and KombiTools can be com‐

bined to produce a power tool. In this instruction

manual the functional unit formed by the Kom‐

biEngine and KombiTool is referred to as the

power tool.
Therefore, the separate instruction manuals for

the KombiEngine and KombiTool should be used

together for the power tool.

Always read and and make sure you understand

both instruction manuals before using your

power tool for the first time and keep them in a

safe place for future reference.

2

Guide to Using this Manual

2.1

Pictograms

The meanings of the pictograms attached to the

machine are explained in this manual.
Depending on the model concerned, the follow‐

ing pictograms may be attached to your

machine.

Fuel tank; fuel mixture of gasoline

and engine oil

Operate decompression valve

Manual fuel pump

Operate manual fuel pump

Tube of grease
Intake air: Summer operation

Intake air: Winter operation

Handle heating

2.2

Symbols in text

WARNING

Warning where there is a risk of an accident or

personal injury or serious damage to property.

NOTICE

Caution where there is a risk of damaging the

machine or its individual components.

2.3

Engineering improvements

STIHL's philosophy is to continually improve all

of its products. For this reason we may modify

the design, engineering and appearance of our

products periodically.

English

2

0458-436-0121-B

© ANDREAS STIHL AG & Co. KG 2021

0458-436-0121-B. VA0.H21.

Printed on chlorine-free paper

Printing inks contain vegetable oils, paper can be recycled.

Original Instruction Manual

0000007393_010_GB

Summary of Contents for KM 111 R

























Reviews: