background image

Therefore, some changes, modifications and

improvements may not be covered in this man‐

ual.

3

Safety Precautions and

Working Techniques

Special safety precautions must be

observed when working with a power

tool.

Always read and and make sure you

understand both instruction manuals

(KombiMotor and KombiTool) before

using your power tool for the first time

and keep them in a safe place for

future reference. Non-observance of

the safety precautions may result in

serious or even fatal injury.

Observe all applicable local safety regulations,

standards and ordinances.
If you have not used this type of power tool

before: Have your dealer or other experienced

user show you how it is operated or attend a

special course in its operation.
Minors should never be allowed to use a power

tool.
Keep bystanders, especially children, and ani‐

mals away from the work area.
When the power tool is not in use, shut it off so

that it does not endanger others. Secure it

against unauthorized use.
The user is responsible for avoiding injury to third

parties or damage to their property.
Lend or rent your power tool only to persons who

are familiar with this model and its operation – do

not lend your power tool without the KombiMotor

and KombiTool instruction manuals.
The use of noise emitting power tools may be

restricted to certain times by national or local

regulations.
To operate the power tool you must be rested, in

good physical condition and mental health.
If you have any condition that might be aggrava‐

ted by strenuous work, check with your doctor

before operating a power tool.
Persons with pacemakers only: The ignition sys‐

tem of your power tool produces an electromag‐

netic field of a very low intensity. This field may

interfere with some pacemakers. STIHL recom‐

mends that persons with pacemakers consult

their physician and the pacemaker manufacturer

to reduce any health risk.
Do not operate the power tool if you are under

the influence of any substance (drugs, alcohol)

which might impair vision, dexterity or judgment.
Use your power tool only for the applications

described in the instruction manual of the Kombi‐

Tool you are using.
Do not use your power tool for any other purpose

because of the increased risk of accidents.
Do not operate the KombiEngine without a prop‐

erly mounted KombiTool since this may result in

damage to the machine.
Only use KombiTools and accessories that are

explicitly approved for this power tool by STIHL

or are technically identical. It is important that

you read the chapter on "Approved KombiTools".

If you have any questions in this respect, consult

a servicing dealer. Use only high quality tools

and accessories in order to avoid the risk of acci‐

dents and damage to the machine.
STIHL recommends the use of genuine STIHL

tools and accessories. They are specifically

designed to match the product and meet your

performance requirements.
Never attempt to modify your machine in any

way since this may increase the risk of personal

injury. STIHL excludes all liability for personal

injury and damage to property caused while

using unauthorized attachments.
Do not use a pressure washer to clean your

power tool. The solid jet of water may damage

parts of the power tool.

3.1

Clothing and Equipment

Wear proper protective clothing and equipment.

Avoid clothing that could get caught

on branches or brush or moving parts

of the machine. Do not wear a scarf,

necktie or jewelry. Tie up long hair so

that it is above shoulder level.

See also notes on "Clothing and Equipment" in

the instruction manual of the KombiTool you are

using.

3 Safety Precautions and Working Techniques

English

0458-436-0121-B

3

Summary of Contents for KM 111 R

























Reviews: