► Ensure that the following components are in a
safe condition:
–
–
–
–
Battery, 4.6.4.
► Check the battery, 11.6.
► Fully charge battery as described in the User
Manual for the STIHL AL 101, 300, 301-4, 500
chargers.
► Clean the pole pruner, 16.1.
► Assemble the pole pruner (HTA 86), 8.1.
► Mount the guide bar and saw chain, 8.2.1.
► Fill up with saw chain oil, 8.4.
► Adjust the shaft length (HTA 86), 12.1.
► Fit and adjust the carrying system, 12.2.
► Check the chain lubrication, 11.5.
► If you cannot carry out this work: Do not use
your pole pruner and contact your STIHL
dealer for assistance.
5.2
Connecting the Battery with the
STIHL App by means of a
Bluetooth
®
Radio Interface
► Activate the Bluetooth
®
radio interface on the
mobile device.
► Activating the Bluetooth
®
radio interface on
the battery, 7.1.
► Download STIHL App from the app store of
your mobile device and create an account.
► Open and sign in on the STIHL App.
► Add the battery in the STIHL App and follow
the instructions on the screen.
For contacts and other information, please visit
https://support.stihl.com or the app.
The STIHL connected feature is available in the
STIHL App in certain markets.
6
Charging the Battery, LEDs
6.1
Charging the Battery
The charging time depends on various factors,
e.g. the battery temperature or the ambient tem‐
perature. The actual charging time may vary
from the charging time indicated. The charging
time is indicated at www.stihl.com/charging-
► Recharge the battery as described in the User
Manual for the STIHL AL 101, 300, 301-4, 500
chargers.
6.2
Displaying the charge level
0000079877_002
20-40%
40-60%
60-80%
80-100%
0-20%
1
► Press the button (1).
The LEDs light up green for about 5 seconds
and indicate the state of charge.
► If the LED on the right flashes green: Charge
the battery.
6.3
LEDs on Battery
The LEDs can show the state of charge or mal‐
functions. The LEDs can glow or flash green or
red.
The state of charge is indicated when the LEDs
glow or flash green.
► If the LEDs glow or flash red: Troubleshooting,
There is a malfunction in the pole pruner or
battery.
7
Activating and Deactivating
Bluetooth® Radio Interface
7.1
Activating the Bluetooth
®
Radio
Interface
► If the battery is equipped with a Bluetooth
®
radio interface: press the button and hold it
depressed for about 3 seconds.
The "BLUETOOTH
®
" LED next to the sym‐
bol lights up blue for about 3 seconds. The
Bluetooth
®
radio interface on the battery is
activated.
7.2
Deactivating the Bluetooth
®
Radio Interface
► If the battery is equipped with a Bluetooth
®
radio interface: press the button and hold it
depressed for about 3 seconds.
The "BLUETOOTH
®
" LED next to the sym‐
bol flashes blue for six times. The Blue‐
tooth
®
radio interface on the battery is deacti‐
vated.
6 Charging the Battery, LEDs
English
0458-191-9821-B
39