HT 250
English
15
Chain scabbard
Your pole pruner comes standard with a
chain scabbard that matches the cutting
attachment.
If you use guide bars of different lenghts
on the pole pruner, the length of the
chain scabbard must be matched to the
guide bar to reduce the risk of injury. It
should cover the full length of the guide
bar.
The length of the matching guide bars is
marked on the side of the chain
scabbard.
Removing the Chain Sprocket Cover
N
Unscrew the nut and remove the
chain sprocket cover.
N
Turn the screw (1) clockwise until
the tensioner slide (2) butts against
the right end of the housing slot.
Fitting the Chain
WARNING
Wear work gloves to protect your hands
from the sharp cutters.
N
Fit the chain – start at the bar nose.
001BA244 KN
Mounting the Bar and Chain
246BA021 KN
1
2
246BA022-A1
390BA003 KN
Summary of Contents for HT 250
Page 2: ...Instruction Manual 1 43 Manual de instrucciones 44 90 ...
Page 93: ...HT 250 español EE UU 91 ...
Page 94: ...HT 250 español EE UU 92 ...
Page 95: ......