![background image](http://html1.mh-extra.com/html/stihl/ht-105/ht-105_instruction-manual_1379545031.webp)
HT 105, HT 134, HT 135
English
29
N
Refit the spark arresting screen (5)
N
Insert and tighten screw (4)
If there is a loss of engine power, the
machine is difficult to start or runs poorly
at idle, first check the spark plug.
Install a new spark plug after
approximately 100 operating hours or
earlier if the electrodes are
eroded/corroded.
The wrong fuel mix (too much engine oil
in the gasoline), a dirty air filter and
unfavorable running conditions (mostly
at part throttle etc.) affect the condition
of the spark plug. These factors cause
deposits to form on the insulator nose,
which may degrade performance.
Removing the Spark Plug
N
Remove the cover (1).
N
Pull off the spark plug boot (2).
N
Unscrew the spark plug (3).
Checking the Spark Plug
N
Clean dirty spark plug.
N
Check electrode gap (A) and
readjust if necessary – see
"Specifications".
N
Rectify the problems which have
caused fouling of the spark plug.
Possible causes are:
–
Too much oil in fuel mix.
–
Dirty air filter.
–
Unfavorable running conditions.
WARNING
Arcing may occur if the adapter nut (1) is
loose or missing. Working in an easily
combustible or explosive atmosphere
may cause a fire or an explosion. This
can result result in serious injuries or
damage to property.
Spark Plug
3
2
1
0000-GXX 0537-A0
000BA039 KN
A
1
000BA045 KN