![background image](http://html1.mh-extra.com/html/stihl/ht-105/ht-105_instruction-manual_1379545011.webp)
HT 105, HT 134, HT 135
English
9
for HT 134
Always hold the shaft with your left hand
in the area of the handle hose.
The shaft should always be held at an
angle of 60° or less.
The least tiring working position is a tool
angle of 60°.
Any lesser angle may be used to suit the
situation.
Cross-cut
To avoid pinching the bar in the cut,
position the cutting attachment with the
housing against the branch and then
perform the cross-cut from the top
downwards.
Relieving cut
To avoid tearing the bark on thick
branches, always start by performing a
N
relieving cut (1) on the underside of
the branch. To do this, position the
cutting attachment and guide it
down to the bar nose in an arc.
N
Perform the cross cut (2) – position
the slide with the housing against
the branch.
Flush-cutting thick branches
If the branch diameter is more than
10 cm (4 in), first
N
perform the undercut (3) and then
cross-cut at a distance of about
20 cm/8 in (A) from the final cut.
Then carry out the flush-cut (4),
starting with a relieving cut and
finishing with a cross-cut.
246BA030 KN
0000003462_002
2
1
0000003451_002
3
4
A
390BA024 KN