2
0000-GXX-3418-A0
1
3
The length of the connecting cable can be adjus‐
ted by making a loop (1) and securing it to the
belt bag (3) with the fastener (2).
► Arrange the connecting cable so that it is as
short as possible without hindering your work.
7
Inserting and Removing
Connecting Cable Plug
7.1
Inserting the Connecting Cable
Plug
1
0000-GXX-291
1-A0
2
► Hold connecting cable plug (1) so that the
arrow on its side lines up with the arrow on the
socket (2).
► Insert the connecting cable plug (1) in the
socket (2).
The plug (1) engages in position.
7.2
Removing the Connecting
Cable Plug
1
0000-GXX-2912-A0
2
► Grip the connecting cable plug (1) with your
hand.
► Pull the plug (1) out of the socket (2).
8
Switching the Hedge Trim‐
mer On/Off
8.1
Switching On
WARNING
■ The motor accelerates and the cutting blades
run regardless of the sequence in which the
switch lever and trigger are depressed. If you
depress the trigger first and then the switch
lever, you may lose control of the hedge trim‐
mer. This can result in serious injuries.
► Depress the switch lever first and then the
trigger.
4
1
0000-GXX-2913-A0
2
3
► Depress the switch lever (1) and hold it in that
position.
► Push the retaining latch (2) with your thumb to
position .
► Depress the trigger lockout (3) with your hand
and hold it there.
► Pull the trigger (4) with your index finger and
hold it there.
The motor accelerates and the cutting blades
run.
The more you depress the trigger, the faster the
cutting blades run.
8.2
Switching Off
► Release the switch lever, trigger and lockout
lever.
► Wait until the cutting blades come to a com‐
plete standstill after about 1 second.
► If the cutting blades continue to run after about
1 second: Pull connecting cable plug out of the
socket and contact your STIHL servicing
dealer.
Your hedge trimmer has a malfunction.
► Push the retaining latch into position .
7 Inserting and Removing Connecting Cable Plug
English
0458-005-9621-B
29
