![background image](http://html1.mh-extra.com/html/stihl/hsa-66/hsa-66_instruction-manual_1379748033.webp)
23.3
Electrical safety
a
)
Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools.Unmodified plugs and matching outlets
will reduce risk of electric shock.
b
)
Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of
electric shock if your body is earthed or groun‐
ded.
c
)
Do not expose power tools to rain or wet con‐
ditions. Water entering a power tool will
increase the risk of electric shock.
d
)
Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords
increase the risk of electric shock.
e
)
When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of
a cord suitable for outdoor use reduces the
risk of electric shock.
f
)
If operating a power tool in a damp location is
unavoidable, use a residual current device
(RCD) protected supply. Use of an RCD
reduces the risk of electric shock.
23.4
Personal safety
a
)
Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use a power tool while you are tired or
under the influence of drugs, alcohol or medi‐
cation. A moment of inattention while operat‐
ing power tools may result in serious personal
injury.
b
)
Use personal protective equipment. Always
wear eye protection. Protective equipment
such as a dust mask, non-skid safety shoes,
hard hat or hearing protection used for appro‐
priate conditions will reduce personal injuries.
c
)
Prevent unintentional starting. Ensure the
switch is in the off-position before connecting
to power source and/or battery pack, picking
up or carrying the tool. Carrying power tools
with your finger on the switch or energising
power tools that have the switch on invites
accidents.
d
)
Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key
left attached to a rotating part of the power tool
may result in personal injury.
e
)
Do not overreach. Keep proper footing and
balance at all times. This enables better con‐
trol of the power tool in unexpected situations.
f
)
Dress properly. Do not wear loose clothing or
jewellery. Keep your hair and clothing away
from moving parts. Loose clothes, jewellery or
long hair can be caught in moving parts.
g
)
If devices are provided for the connection of
dust extraction and collection facillities, ensure
these are connected and properly used. Use
of dust collection can reduce dust-related haz‐
ards.
h
)
Do not let familiarity gained from frequent use
of tools allow you to become complacent and
ignore tool safety principles. A careless action
can cause severe injury within a fraction of a
second.
23.5
Power tool use and care
a
)
Do not force the power tool. Use the correct
power tool for your application. The correct
power tool will do the job better and safer at
the rate for which it was designed.
b
)
Do not use the power tool if the switch does
not turn it on and off. Any power tool that can‐
not be controlled with the switch is dangerous
and must be repaired.
c
)
Disconnect the plug from the power source
and/or remove the battery pack, if detachable,
from the power tool before making any adjust‐
ments, changing accessories, or storing power
tools. Such preventive safety measures
reduce the risk of starting the power tool acci‐
dentally.
d
)
Store idle power tools out of the reach of chil‐
dren and do not allow persons unfamiliar with
the power tool or these instructions to operate
the power tool. Power tools are dangerous in
the hands of untrained users.
e
)
Maintain power tools and accessories. Check
for misalignment or binding of moving parts,
breakage of parts and any other condition that
may affect the power tool’s operation. If dam‐
aged, have the power tool repaired before
use. Many accidents are caused by poorly
maintained power tools.
f
)
Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting
edges are less likely to bind and are easier to
control.
g
)
Use the power tool, accessories and tool bits
etc. in accordance with these instructions, tak‐
ing into account the working conditions and
23 General Power Tool Safety Warnings
English
0458-703-9621-C
33