background image

3.6.2

Horizontal Cut

Hold the cutter bar at an angle of 0° to 10° as

you swing the hedge trimmer horizontally.
Swing the cutting blade in an arc towards the

outside of the hedge so that the cuttings are

swept to the ground.
Cuttings can be easily swept off the hedge with

the aid of the optional catcher plate on the cut‐

ting blade.

4

Fuel

Your engine requires a mixture of gasoline and

engine oil.

WARNING

For health reasons, avoid direct skin contact with

gasoline and avoid inhaling gasoline vapor.

4.1

STIHL MotoMix

STIHL recommends the use of STIHL MotoMix.

This ready-to-use fuel mix contains no benzol or

lead, has a high octane rating and ensures that

you always use the right mix ratio.
STIHL MotoMix uses STIHL HP Ultra two-stroke

engine oil for an extra long engine life.
MotoMix is not available in all markets.

4.2

Mixing Fuel

NOTICE

Unsuitable fuels or lubricants or mix ratios other

than those specified may result in serious dam‐

age to the engine. Poor quality gasoline or

engine oil may damage the engine, sealing rings,

hoses and the fuel tank.

4.2.1

Gasoline

Use only high-quality brand-name gasoline with

a minimum octane rating of 90 – leaded or unlea‐

ded.
Gasoline with an ethanol content of more than

10% can cause running problems in engines with

a manually adjustable carburetor and should not

be used in such engines.
Engines equipped with M-Tronic deliver full

power when run on gasoline with an ethanol con‐

tent of up to 25% (E25).
4.2.2

Engine Oil

If you mix the fuel yourself, use only STIHL two-

stroke engine oil or another high-performance

engine oil in accordance with JASO FB, JASO

FC, JASO FD, ISO-L-EGB, ISO-L-EGC or ISO-L-

EGD.
STIHL specifies STIHL HP Ultra two-stroke

engine oil or an equivalent high-performance

engine oil in order to maintain emission limits

over the machine’s service life.
4.2.3

Mix Ratio

STIHL 50:1 two-stroke engine oil: 50 parts gaso‐

line to 1 part oil
4.2.4

Examples

Gasoline

STIHL engine oil 50:1

Liters

Liters

(ml)

1

0.02

(20)

5

0.10

(100)

10

0.20

(200)

15

0.30

(300)

20

0.40

(400)

25

0.50

(500)

► Use a canister approved for storing fuel. Pour

oil into canister first, then add gasoline and

mix thoroughly.

4.3

Storing Fuel

Store fuel only in approved safety-type fuel can‐

isters in a dry, cool and safe location protected

from light and the sun.

English

4 Fuel

8

0458-449-0121-C

Summary of Contents for HS 87

























Reviews: