HLE 71, HLE 71K
English
38
Strain relief
N
Make a loop in the extension
cord (3)
N
Guide the loop (3) through the
opening (4)
N
Guide the loop (3) over the hook (5)
and pull it tight
N
Plug the extension cord into a
properly installed outlet
N
Make sure you have a secure and
firm footing.
N
Hold your unit with both hands –
right hand on the control handle –
left hand on the loop handle.
N
Stand upright – hold the unit in a
relaxed position and always on right
side of your body.
N
Make sure the cutting attachment is
not touching the ground or any other
objects.
N
Press down the starting lockout
lever (1) and hold it in that position.
N
Squeeze the trigger switch (2) and
hold it in that position.
N
Release the trigger switch and
starting lockout lever.
WARNING
Note that the cutting attachment
continues to run for a short period after
you let go of the throttle trigger and
starting lockout lever – flywheel effect.
During longer work breaks – disconnect
the plug from the power supply.
When the machine is not in use, shut it
off so that it does not endanger others.
Secure it against unauthorized use.
4
238BA009 KN
5
3
Switching On
2
1
277BA029 KN
Switching Off
