Stihl HLA 135, Instruction Manual, Page: 4 / 28

21 Pushbutton
The pushbutton activates the LEDs on the
battery. The pushbutton activates and deacti‐
vates Bluetooth® radio interface (if available).
22 "BLUETOOTH
®
" LED (only for batteries with
)
The LED indicates the activation and deacti‐
vation of the Bluetooth® interface.
# Rating plate with the machine number
3.2 STIHL HLA 135 K long-reach
hedge trimmer and battery
2
11
10
9
12
14
13
3
4
1
#
15
16
5
17
8
6
7
5
0000097310_003
21
#
20
19
18
1 Shaft
The shaft connects all components.
2 Handle hose
For holding and controlling the long-reach
hedge trimmer.
3 Cutting blades
The cutting blades cut the material to be trim‐
med.
4 Blade scabbard
The blade scabbard protects against contact
with the cutting blades.
5 Screw plug
The screw plug closes the filler opening for
STIHL gear grease.
6 Swivel handle
Serves to adjust angle of cutting blades.
7 Sliding sleeve
Unlocks the blade angle adjuster.
8 Locking lever
The locking lever holds the battery in the bat‐
tery compartment.
9 Battery compartment
The battery compartment holds the battery.
10 Cover
2
The cover is the placeholder for a Smart Con‐
nector 2 A.
11 Trigger lockout
The trigger lockout unlocks the trigger.
12 Release slide
The release slide is used to switch on the
long-reach hedge trimmer.
13 LED
These LEDs indicate the selected power
level.
14 Carrying ring
The carrying ring is for attaching the carrying
system.
15 Trigger
Switches the long-reach hedge trimmer on
and off.
16 Control handle
For operating, holding and controlling the
long-reach hedge trimmer.
17 Air filter
The air filter filters the air entering the engine.
18 Battery
Supplies power to the long-reach hedge trim‐
mer.
19 LEDs
The LEDs indicate the state of charge of the
battery and any faults.
20 Pushbutton
The pushbutton activates the LEDs on the
battery. The pushbutton activates and deacti‐
vates Bluetooth® radio interface (if available).
21 "BLUETOOTH ®
" LED (only for batteries with
)
The LED indicates the activation and deacti‐
vation of the Bluetooth® interface.
2
The cover is part of the motor housing. Only remove the cover to install a Smart Connector 2 A and
store it safely for later re-installation. Always use the long-reach hedge trimmer with the cover or Smart
Connector 2 A installed.
English 3 Overview
4 0458-683-0121-B