HL 100, HL 100 K
English
15
N
Shut off the engine.
N
Fit the blade scabbard.
N
Pull back the sliding sleeve (1) and
use the lever (2) to swing the joint
upwards – in direction of drive tube
– until the cutter bar is flat against
the drive tube.
N
Release the sliding sleeve (1) and
make sure the lock pin engages the
quadrant (3).
The sliding sleeve butts against the
housing when the pin is properly
engaged (after making adjustment).
Some versions of the machine can be
carried on a harness.
The type and style of the harness
depend on the market.
Shoulder strap
N
Put on the shoulder strap (1).
N
Adjust the length of the strap.
N
With the power tool attached, the
carabiner (3) must be at about the
same height as your right hip.
Full harness
N
Put on the full harness (2).
N
Adjust the length of the strap.
N
With the power tool attached, the
carabiner (3) must be at about the
same height as your right hip.
Fitting the Harness
1
388BA037 KN
3
2
388BA038 KN
3