HL 100, HL 100 K
English
11
Mounting the Loop Handle
Necessary on versions with long drive
tube and 135° adjustable cutter bar (not
on HL 100 K).
N
Place the clamp (1) in the loop
handle (2) and position them both
against the drive tube (5) between
the carrying ring (3) and handle
hose (4).
N
Place the clamp (6) against the
drive tube.
N
Line up the holes.
N
Insert the screws (7) with
washers (8).
N
Fit the square nuts (9) and screw
home the screws.
N
Align the loop handle (2) and move
it to the most comfortable position.
Distance (A) must not be more than
55 cm (recommended: about 35 cm).
N
Tighten down the screws firmly.
Mounting the Gearbox
N
Loosen the clamp screws (9).
N
Push the gearbox (10) onto the
drive tube (5), turn the gearbox (10)
back and forth as necessary.
Assembling the Unit
7
8
2
388BA034 KN
1
6
7
8
9
9
3
388BA035 KN
2
A