FW 20
English
13
Mounting the limit stop
N
Position limit stop (1) on cut-off
machine cart – the holes must line
up
N
Screw in and tighten bolts (2) with
washer (3) on
Cutting depth adjustment
N
The cutting depth adjustment is
actuated via the lever (1)
Lever position
A Depth limiter unlocked
B Depth limiter locked
Position A – unlocking
For setting the required cutting depth
and entering the cut.
Position B – locking
For fixing the set cutting depth and
working with a uniform cutting depth.
Release with combination wrench
If the cutting depth adjustment cannot be
released via the lever on the guide tube,
it can still be released with the
combination wrench.
WARNING
Always switch off the engine before
unlocking with a combination wrench –
do not touch the hot muffler.
N
Insert the combination wrench (2) in
the hole (3) and press down in the
direction of the arrow
379BA058 KN
379BA059 KN
2
3
Controls
A
379BA052 KN
A
B
379BA053 KN
B
Summary of Contents for FW 20
Page 207: ......
