![background image](http://html1.mh-extra.com/html/stihl/fs510-c-m/fs510-c-m_instruction-manual_1379409026.webp)
FS 510 C-M, FS 560 C-M
English
24
N
Place the cutting attachment (3) in
position.
Collar (a) must locate in the cutting
attachment's mounting hole (b).
N
Fit the 60-mm diameter thrust
washer (4) – convex side must face
up.
N
Fit the 80-mm diameter rider plate
(5).
N
Block the drive shaft.
N
Screw on the nut (6)
counterclockwise and tighten it
down firmly.
Removing the cutting attachment
N
Block the drive shaft.
N
Unscrew the mounting nut (6)
clockwise.
N
Pull the cutting attachment with its
mounting hardware off the gearbox.
Mounting Brush Knives
N
Check that the deflector on the
machine is approved for brush
knives – if not, perform the next two
steps.
N
Remove grass shield with thrust
plate – if fitted.
N
Remove the non-approved
deflector.
N
Mount deflector for grass cutting
blades and brush knives.
N
Use the 65-mm diameter thrust
plate.
Brush knives 305
-
2 (1) and 350
-
3 (2)
may point in either direction – these
cutting attachments must be turned over
regularly to help avoid one-sided wear.
N
Place the cutting attachment (3) in
position.
Collar (a) must locate in the cutting
attachment's mounting hole (b).
N
Fit the 70-mm diameter thrust
washer (4) – convex side must face
up.
N
Fit the guard ring (5) for brush
knives – opening must face up.
N
Block the drive shaft.
N
Screw on the nut (6)
counterclockwise and tighten it
down firmly.
a
002BA469 KN
b
4
5
3
6
1
2
681BA187 KN
3
002BA494 KN
3
6
4
b
a
5
Summary of Contents for FS510 C-M
