Only use attachments and accessories that are
explicitly approved for this power tool model by
STIHL or are technically identical. If you have
any questions in this respect, consult your
dealer.
Only use cutting attachments and accessories
that are explicitly approved for this power tool
model by STIHL or are technically identical. If
you have any questions in this respect, consult
your dealer.
Use only high-quality parts and accessories. in
order to avoid the risk of accidents and damage
to the machine.
STIHL recommends the use of original STIHL
tools, cutting attachments and accessories. They
are specifically designed to match the product
and meet your performance requirements.
The guard provided with your machine may not
protect the operator from all foreign objects
(gravel, glass, wire etc.) ejected by the revolving
cutting attachment. Ejected objects may also ric‐
ochet and strike the operator.
Never attempt to modify your power tool in any
way since this may increase the risk of personal
injury. STIHL excludes all liability for personal
injury and damage to property caused while
using unauthorized attachments.
Do not use a high-pressure washer to clean the
power tool. The solid jet of water may damage
parts of the unit.
3.1
Clothing and Equipment
Wear proper protective clothing and equipment.
Clothing must be sturdy but allow
complete freedom of movement.
Wear close-fitting clothes such as a
boiler suit, not a loose jacket.
Do not wear clothing which could become trap‐
ped in wood, brush or moving parts of the
machine. Do not wear a scarf, necktie or jewelry.
Tie up and secure long hair above your should‐
ers.
Wear safety boots with steel toe caps
and non-slip soles.
WARNING
To reduce the risk of eye injuries,
wear close-fitting safety glasses in
accordance with European Standard
EN 166. Make sure the safety
glasses are a snug fit.
Wear face protection and make sure it is a good
fit. Face protection alone is not sufficient to pro‐
tect the eyes.
Wear "personal" sound protection, e.g. ear
defenders.
Wear sturdy protective gloves made
of a resistant material (e. g. leather).
STIHL offers a comprehensive range of personal
protective equipment.
3.2
Transporting the Unit
469BA060 KN
Always stop the engine.
Transport the machine by the handle or loop
handle, working tool facing forward.
Never touch hot parts – risk of burns!
Transporting by vehicle: Allow engine to cool
down, properly secure your power tool to prevent
toppling over, fuel spillage and damage.
3.3
Before starting
Check that your power tool is properly assem‐
bled and in good condition – refer to appropriate
chapters in the MultiEngine and MultiTool user
manuals.
–
The combination of cutting attachment and
deflector must be permissible and all parts
must be mounted correctly
–
Check cutting attachment for correct and
secure assembly and good condition
–
Check safety devices (e. g., deflector for cut‐
ting attachments) for damage and/or wear.
Always replace damaged parts. Do not oper‐
ate your machine with a damaged deflector
and/or worn cutting attachment (lettering and
arrows no longer legible)
3 Safety Precautions and Working Techniques
English
0458-480-0121-B
3
