background image

3

4

1

2

0000097401_001

► Depress the manual fuel pump (1) at least 5

times.

► If the engine is warm: Leave the choke lever

(2) in position  .

► If the engine is at ambient temperature: Push

in the choke lever (2) at the edge and set it in
position  .

0000-GXX-4729-A0 

NOTICE

■ The brushcutter can be damaged if you press

it into the ground with your foot or knee .

► Press the brushcutter against the ground

with your left hand. Do not stand or kneel

on the shaft.

► Press the brushcutter against the ground with

your left hand.

► Pull the starter grip slowly with your right hand

until you feel it engage.

► Pull the starter grip quickly and allow the

starter rope to rewind several times until the

engine runs.

► If the choke lever (2) is in the position  :

briefly press the throttle lever lockout (3) and

the throttle trigger (4).
The choke lever (2) springs to position  . The

engine runs at idling speed.

► If the engine is cold: Warm up engine by

briefly opening the throttle.

► If the cutting attachment rotates when the

engine is idling: Rectify the malfunction.

Throttle cable adjustment is not correct.

► If the engine does not start: Move the choke

lever (2) to position   and try again to start

the engine.

► If the engine is flooded: Try to start the engine

again with the choke lever (2) in the   position.

9.2

Shut off the engine

2

3

1

0000097402_001

► Release the throttle trigger (1) and throttle trig‐

ger lockout (2).

The cutting attachment comes to a standstill.

► Depress the stop switch (3).

The engine stops.

► If the engine does not stop:

► Move the choke lever to position  .

The engine stops.

► Do not use your trimmer and contact a

STIHL servicing dealer for assistance.

There is a malfunction in the brushcutter.

As long as the stop switch is pressed, the ignition

is switched off. After the stop switch has been

released again, the ignition is switched on again.

10 Testing the Trimmer

10.1

Checking the controls

Throttle trigger lockout and throttle trigger

► Shut off the engine.

► Attempt to pull the trigger without depressing

the lockout lever.

► If the trigger can be pulled: Do not use your

trimmer and contact your STIHL dealer for

assistance.

The throttle trigger lockout is defective.

► Press the throttle trigger lockout and keep

pressed.

► Depress the throttle trigger.

► Release the throttle trigger and throttle trigger

lockout.

► If the trigger or trigger lockout is stiff or does

not spring back to the idle position: Do not use

your trimmer and contact your STIHL dealer

for assistance.

Trigger or trigger lockout is faulty.

Throttle cable adjustment

► Start the engine.

► Attempt to pull the trigger without depressing

the lockout lever.

10 Testing the Trimmer

English

0458-844-0101-A

15

Summary of Contents for FS 491 C-M

























Reviews: