FS 410 C-M, FS 460 C-M
English
15
N
Move the handlebar to the required
position.
Closing the wing screw
N
Turn the wing screw clockwise as
far as stop.
N
Fold the grip of the wing screw down
so that it is flush.
Swiveling the handlebar
Transport position
N
Loosen the wing screw (7) and
unscrew it until the handlebar (2)
can be turned clockwise.
N
Turn the handlebar 90° and then
swing the handles down.
N
Tighten down the wing screw (7)
firmly.
Working position
N
Reverse the sequence described
above to swing the handles up and
turn the handlebar
counterclockwise.
It may be necessary to correct the
adjustment of the throttle cable after
assembling the machine or after a
prolonged period of operation.
Adjust the throttle cable only when the
unit is completely and properly
assembled.
N
Set the throttle trigger to the full
throttle position.
N
Carefully rotate the screw in the
throttle trigger in the direction of the
arrow until you feel initial resistance.
Then rotate it another half turn in the
same direction.
4BA007 KN
4BA005 KN
4BA006 KN
2
7
4BA008 KN
Adjusting the Throttle Cable
002BA655 KN