![background image](http://html1.mh-extra.com/html/stihl/fs-40/fs-40_service-manual_1378633006.webp)
5
Series 4144 Components FC, FS, KM
3.4
Tightening Torquese
DG and P (Plastoform) screws are used in polymer and light metal components. These screws form a
permanent thread when they are installed for the first time. They can be removed and installed as often as
necessary without impairing the strength of the screwed assembly, providing the specified tightening torque is
observed.
For this reason it is
essential to use a torque wrench.
Fastener
Thread size
For component
Torque
Nm
Remarks
Screw
P 6x14
Line limiting blade/deflector
2.5
Screw
M 5x30
Control handle/handle/nut with washer
2.0
Screw
P 5x14
Filter cover/filter housing
3.0
Nut
M 5
Filter housing/carburetor/spacer flange
3.5
Screw
P 4x12
Throttle cable/engine housing
1.5
Screw
D 6x28
Gearbox/drive tube clamp (FS 56)
12.0
Screw
D 5x20
Shroud/cylinder
6.0
Screw
M 6x35
Clamp/clamp block/clamp
4.5
Screw
M 6x25
Clamp/loop handle
4.5
Screw
P 5x20
Engine housing/shroud
4.0
Screw
M 5x20
Engine housing/crankcase
7.0
Screw
P 5x20
Engine housing torsion lock/drive tube
4.0
Screw
M 5x14
Deflector/gearbox (FS 56)
4.5
Screw
M 6x30
Deflector/drive tube/nut /FS 40,50)
5.0
Screw
M 6x14
Clamp/drive tube/harness ring
4.5
Screw
D 5x20
Starter cover/crankcase
6.0
Screw
D 5x20
Starter cover/engine pan
6.0
Screw
M 4x9
End cover/carburetor
2.0
Summary of Contents for FS 40
