FS 38
español / EE.UU
75
STIHL AutoCut C 5
-
2
Desarmado de la cabeza segadora y
retiro del hilo de nilón restante
Durante el funcionamiento normal, se
utiliza todo el hilo de nilón disponible en
la cabeza segadora.
N
Sujete bien firme la cabeza
segadora y gire la tapa (1) en
sentido contrahorario hasta que la
pueda retirar.
N
Extraiga el carrete (2) de la cabeza
segadora (3) y saque el hilo
restante.
Armado de la cabeza segadora
N
Coloque el carrete vacío en la
cabeza segadora.
Si el resorte (4) se ha salido de su lugar:
N
empújelo dentro del carrete (2)
hasta que se enganche en posición
haciendo un chasquido audible.
N
Instale la cabeza segadora – vea
"Montaje de la cabeza segadora".
Enrollado del hilo en el carrete
N
Use hilo de nilón codificado verde
de 2,0 mm (0,08 pulg) de diámetro.
N
Corte dos trozos de hilo de nilón de
2 m (6 pies 6 pulg) de largo del
carrete (accesorio especial).
N
Gire el carrete (2) en sentido
contrahorario hasta que las dos
puntas de flecha estén alineadas.
N
Empuje el extremo recto de cada
hilo a través de un manguito (5) en
la cabeza segadora (3) hasta sentir
resistencia, y luego siga empujando
hasta el tope.
Schnur/LINE 1
681BA021 KN
1
2
3
Schnur/LINE 1
681BA022 KN
2
4
Schnur/LINE 2
681BA023 KN
5
Schnur/LINE 1
3
3
2