•
Push installing tool (1)
4126 893 4900 into AV sleeve
as far as stop.
•
Tighten down clamp screw (2).
•
Tighten the fixing screw (3)
moderately if necessary.
- Apply a little lubricant (e.g.
washing-up liquid) between
the clutch housing and rubber
element.
- Clamp installing tool in vice.
•
Pull clutch housing off the
rubber element.
•
Release clamp screw (1) and
fixing screw (2) if necessary.
•
Pull the AV sleeve (3) off the
installing tool.
•
Pull the rubber element off the
AV sleeve.
•
Push the rubber element, larger
diameter (1) first, onto the AV
sleeve until the inner groove (2)
engages the annular rib (3).
- Coat rubber element with a
lubricant (e.g. washing-up liquid).
•
Push the rubber element into
clutch housing as far as stop
so that slot (1) is opposite the
straight side (2) of the clutch hou-
sing.
Assemble all other parts in the
reverse sequence.
- Retaining ring must locate
properly in the groove in the
clutch housing.
FS 25-4, 65-4
31