background image

4.8

Working

WARNING

■ If the engine is not started properly, the user

may lose control of the trimmer. This may

result in serious injury to the user.

► Start the engine as described in this instruc‐

tion manual.

► If the cutting attachment is touching the

ground or objects: Do not start the engine.

■ If the start flap lever is in the position   when

the engine is started, the engine speed is

higher than the idle speed and the cutting

attachment can rotate as soon as the engine

is running. This may result in serious injury to

the user.

► Do not touch the cutting attachment.

► Start the engine as described in this instruc‐

tion manual.

■ In certain situations, the user may no longer

be able to concentrate on their work. The user

can lose control of the trimmer, stumble or fall

and be seriously injured.

► Keep calm and plan your work.

► If light and visibility are poor: Do not use

your trimmer.

► Operate the trimmer alone.

► Keep the cutting attachment close to the

ground.

► Watch out for obstacles.

► Work standing on the ground and keep your

balance.

► If you start feeling fatigue: Take a break.If

you start feeling fatigue: Take a break.

■ Exhaust gas is produced when the engine is

running. Breathing in exhaust gas can have

toxic effects.Breathing in exhaust gas can

have toxic effects.

► Avoid inhaling exhaust gas.

► Operate the trimmer is a well ventilated

location.

► In the event of nausea, headache, visual

disturbances, problems with hearing or diz‐

ziness: Stop work and seek medical advice.

■ The user’s ability to hear and assess noises is

restricted when wearing hearing protection

with the engine running.

► Keep calm and plan your work.

■ In case of working with the trimmer and the

start flap lever is in the position  , the user

cannot work with the power brush in a control‐

led manner. This may result in serious injury to

the user.

► Check that the choke lever is in position 

during operation.

► Start the engine as described in this instruc‐

tion manual.

■ The rotating cutting attachment can cut the

user. This may result in serious injury to the

user.

► Do not touch the rotating cutting attach‐

ment.

► If the cutting attachment is blocked by an

object: Shut off the engine. Before clearing

the jam.

■ If you work with mowing lines that are too

long, the brush cutter may be damaged.

► Use a suitable deflector with attached line

limiting blade.

■ The machine can be damaged if you open the

throttle while the cutting attachment is blocked

by an object.

► Shut off the engine. before clearing the jam.

■ If the behavior of the trimmer changes during

operation or feels unusual, it may no longer be

in a safe condition. This may result in serious

injury to people and damage to property.

► Stop work and consult a STIHL servicing

dealer.

■ Trimmer vibrations may occur during opera‐

tion.

► Wear gloves.

► Take breaks.

► If signs of a circulatory disturbance occur:

Consult a doctor.

■ If the cutting attachment makes contact with a

foreign object during operation, the object or

parts of it may be thrown at high speed. Per‐

sons may be injured or property damaged.

► Remove foreign objects from the working

area.

■ If the rotating cutting attachment makes con‐

tact with a hard object, sparks may occur and

the cutting attachment may be damaged.

Sparks can cause fires in a flammable envi‐

ronment. Persons may be seriously or fatally

injured and property may be damaged.

► Do not use in a flammable environment.

► Make sure the cutting attachment is in a

safe condition.

■ Note that the cutting attachment continues to

rotate for a short period after you release the

trigger. They may cause serious injury to per‐

sons.

► Wait until the cutting attachment comes to a

complete stop.

4 Safety Precautions

English

0458-563-0101-A

9

Summary of Contents for FR 460 TC-FM





























Reviews: