![background image](http://html1.mh-extra.com/html/stihl/fr-130-t/fr-130-t_instruction-manual_1379668032.webp)
FR 130 T
English
30
Installing the Spark Plug
N
Screw the spark plug (2) into the
cylinder and fit the boot (1) (press it
down firmly).
If engine running behavior is
unsatisfactory even though the air filter
is clean and the carburetor is properly
adjusted, the cause may be the muffler.
Have the muffler checked for
contamination (carbonization) by your
servicing dealer.
STIHL recommends that you have
servicing and repair work carried out
exclusively by an authorized STIHL
servicing dealer.
N
Check the grease level regularly –
about every 25 hours of operation.
N
Unscrew the filler plug (1). If no
grease can be seen on the inside of
the filler plug, screw the tube (2) of
STIHL gear lubricant (special
accessory) into the filler hole.
N
Squeeze up to 5 g grease into the
gearbox.
NOTICE
Do not completely fill the gearbox with
grease.
N
Remove the tube of grease (2).
N
Refit the filler plug (1) and tighten it
down firmly.
2
002BA446 KN
1
Engine Running Behavior
Lubricating the Gearbox
1
233BA010 KN
2