![background image](http://html1.mh-extra.com/html/stihl/fr-130-t/fr-130-t_instruction-manual_1379668017.webp)
FR 130 T
English
15
N
Place the clamp (3) in the loop
handle (4) and position them both
against the drive tube (5).
N
Position the clamp (6) against the
drive tube.
N
Place the barrier bar (2) in position
as shown.
N
Line up the holes.
N
Insert the screws (7) in the holes
and screw them into the barrier bar
as far as stop.
N
Go to "Securing the Loop Handle".
Leave the barrier bar permanently
mounted to the loop handle.
Mounting the Loop Handle without
Barrier Bar
N
Place the clamp (3) in the loop
handle (4) and position them both
against the drive tube (5).
N
Position the clamp (6) against the
drive tube.
N
Line up the holes.
N
Fit the washers (8) on the
screws (7), and insert the screws in
the holes.
N
Screw the square nuts (1) onto the
screws (7) as far as stop.
N
Go to "Securing the Loop Handle".
Securing the Loop Handle
N
Secure the loop handle (4)
about 20 cm/8 in (A) forward of the
control handle (9).
N
Line up the loop handle.
N
Tighten down the screws firmly –
lock the nuts if necessary.
The sleeve (10) (not fitted on all models)
must be between the loop handle and
the control handle.
7
7
6
3
4
2
5
265BA025 KN
266BA030 KN
1
3
4
5
6
7
8
1
8
7
4
A
265BA027 KN
9
10