background image

It is important that you read the

instruction manual before first use

and keep it in a safe place for future

reference. Non-observance of the

instruction manual may result in seri‐

ous or even fatal injury.

Observe all applicable local safety regulations,

standards and ordinances.
If you have not used this model before: Have

your dealer or other experienced user show you

how it is operated or attend a special course in

its operation.
Minors should never be allowed to use this prod‐

uct.
Keep bystanders, especially children, and ani‐

mals away from the work area.
When the power tool is not in use, put it in a

place where it does not endanger others. Secure

it against unauthorized use.
The user is responsible for avoiding injury to third

parties or damage to their property.
Do not lend or rent your power tool without the

instruction manual. Be sure that anyone using

your power tool understands the information con‐

tained in this manual.
The use of noise emitting power tools may be

restricted to certain times by national or local

regulations.
Do not operate your power tool if any of its com‐

ponents are damaged.
Do not use a pressure washer to clean your

power tool. The solid jet of water may damage

parts of the power tool.

2.1

Accessories and replacement

parts

Only use parts and accessories that are explicitly

approved for this power tool by STIHL or are

technically identical. If you have any questions in

this respect, consult a servicing dealer. Use only

high quality parts and accessories in order to

avoid the risk of accidents and damage to the

machine.
STIHL recommends the use of original STIHL

replacement parts and accessories. They are

specifically designed to match the product and

meet your performance requirements.
Never attempt to modify your machine in any

way since this may increase the risk of personal

injury. STIHL excludes all liability for personal

injury and damage to property caused while

using unauthorized attachments.

2.2

Physical Condition

To operate this power tool you must be rested, in

good physical condition and mental health.
If you have any condition that might be aggrava‐

ted by strenuous work, check with your doctor

before operating a power tool.
Persons with pacemakers only: The ignition sys‐

tem of your power tool produces an electromag‐

netic field of a very low intensity. This field may

interfere with some pacemakers. To reduce

health risks, STIHL recommends that persons

with pacemakers consult their physician and the

pacemaker manufacturer before operating this

power tool.
Do not operate the sprayer if you are under the

influence of any substance (drugs, alcohol)

which might impair vision, dexterity or judgment.

2.3

Intended Use

The blower is designed for blow-sweeping

leaves, grass, paper and similar materials, e.g. in

gardens, sports stadiums, car parks and drive‐

ways. It is also suitable for blow-sweeping forest

paths.
Do not blow-sweep hazardous materials.
Do not use the machine for any other purpose

because of the increased risk of accidents and

damage to the machine. Never attempt to modify

the product in any way since this may result in

accidents or damage to the product.

2.4

Clothing and Equipment

Wear proper protective clothing and equipment.

Clothing must be sturdy but allow

complete freedom of movement.

Wear snug-fitting clothing, an overall

and jacket combination, do not wear

a work coat.
Avoid clothing with loose drawstrings,

laces and ribbons, scarves, neckties,

jewelry or anything that could be

sucked into the air intake in the side

and bottom of the machine. Tie up

and confine long hair so that it cannot

be sucked into the machine.

Wear sturdy shoes with non-slip soles.

2 Safety Precautions and Working Techniques

English

0458-391-8321-B

3

Summary of Contents for BR 450

























Reviews: