BR 380
English
20
N
Fit the new spring housing. The
bottom plate must face down. Slip
the outer spring loop over the lug.
N
Reinstall the rope rotor – then go to
"Tensioning the rewind spring".
N
If the spring pops out of the spring
housing and uncoils: Refit it
counterclockwise, starting outside
and working inwards.
Tensioning the rewind spring
N
Make a loop in the unwound starter
rope and use it to turn the rope rotor
six full revolutions in the direction of
the arrow.
N
Hold the rotor steady. Pull out and
straighten the twisted rope.
N
Release the rope rotor.
N
Release the rope slowly so that it
winds onto the rotor. The starter grip
must locate firmly in the rope
bushing. If the grip droops to one
side: Add one more turn on the rope
rotor to increase spring tension.
N
When the starter rope is fully
extended it must still be possible to
rotate the rotor another half turn. If
this is not the case, the spring is
overtensioned and could break.
Take one turn of the rope off the
rotor.
N
Fit the starter cover on the housing.
N
Tighten down the screws firmly.
353BA029 KN
353BA030 KN
Summary of Contents for BR 380
Page 1: ...STIHL BR 380 Instruction Manual...
Page 2: ......
Page 31: ......
Page 32: ...www stihl com 04584530121A 0458 453 0121 A 0458 453 0121 A englisch G...