0458-712-8221-A
18
English
13 Assembling the Blower
For more information,
13.1 Mounting and Adjusting the Nozzle
WARNING
Make sure the battery is removed before starting assembly.
Never operate your blower without a properly mounted
blower tube and nozzle,
supplied or expressly approved by STIHL,
5.5.
The nozzle can be mounted to the blower tube in three
positions to suit the height and reach of the user. The
positions are marked on the blower tube.
To mount the nozzle:
► Align the nozzle mounting lugs (3) with the grooves on the
nozzle (2) and push the nozzle (1) onto the blower
tube (4).
► Rotate the nozzle (1) in the direction of the arrow until it
stops.
The nozzle (1) should lock in position.
► To remove the nozzle (1), reverse the sequence of steps
above.
14.1 Inserting the Battery
WARNING
Never use a malfunctioning, damaged, cracked, leaking or
deformed battery,
6.1. Use and store the battery only
within an ambient temperature range of 14 °F to 122 °F (- 10
°C to 50 °C),
WARNING
To reduce the risk of unintended activation, never store the
battery in the blower,
If the LED flashes red: there is no electric contact
between the battery and the charger. Remove
and reinsert the battery.
or
The battery has a malfunction and must be
replaced. Check the LEDs on the battery. Do not
use or charge a battery if its LEDs indicate a
malfunction.
or
The charger has a malfunction. Have it checked
by an authorized STIHL servicing dealer before
use.
13 Assembling the Blower
14 Inserting and Removing the Battery
2
0000-GXX-0625-A0
4
3
1