background image

Fault

LEDs on the

battery

Cause

Remedy

► If blower continues to cut out during

operation: Clean contacts of connecting

cable as described in the User Manual

for the STIHL AR battery or the “AP belt

bag with connecting cable”.

► Turn on the blower.

The blower oper‐

ating time is too

short.

 

The battery is not fully

charged.

► Fully charge battery as described in the

User Manual for the STIHL AL 101, 301,

301-4, 500 chargers.

 

 

The battery service

life has been excee‐

ded.

► Replace battery.

17 Specifications

17.1

STIHL BGA 200 Blower

Approved batteries:

STIHL AR

STIHL AP together with “AP belt bag with

connecting cable”

Blowing force: 21 N

Maximum air velocity: 84 m/s

Average air velocity: 70 m/s

Air flow rate: 940 m³/h

Weight: 3.2 kg

For battery life see www.stihl.com/battery-life.

17.2

Noise and Vibration Data

K-value (uncertainty) for sound pressure levels is

2 dB(A). K-value (uncertainty) for sound power

levels is 2 dB(A). K-value (uncertainty) for vibra‐

tion levels is 2 m/s².
STIHL recommends that you wear hearing pro‐

tection.

Sound pressure level L

pA

 measured according

to EN 50636‑2‑100: 80 dB(A)

Sound power level L

wA

 measured according to

EN 50636-2-100: 91 dB(A)

Vibration level a

hv

 measured according to

EN 50636-2-100, control handle: 0.7 m/s²

The vibration values quoted above have been

measured according to a standardized test pro‐

cedure and may be used to compare electric

power tools. Depending on the type of usage,

the vibrations that actually occur may differ from

the values quoted. The vibration values quoted

may be used for an initial assessment of the

user's exposure to vibrations. The actual expo‐

sure to vibrations has to be estimated. This proc‐

ess may also take into account times during

which the electric power tool is switched off and

times during which it is switched on but running

off load.
For information on compliance with Vibration

Directive 2002/44/EC visit www.stihl.com/vib.

17.3

REACH

REACH is an EC regulation and stands for the

Registration, Evaluation, Authorisation and

Restriction of Chemical substances.
For information on compliance with the REACH

regulation see www.stihl.com/reach.

18 Spare Parts and Accesso‐

ries

18.1

Spare parts and accessories

These symbols indicate original STIHL

spare parts and original STIHL acces‐

sories.

STIHL recommends the use of original STIHL

spare parts and accessories.
Despite ongoing market observation, STIHL is

unable to judge the reliability, safety and suitabil‐

ity of other manufacturers' spare parts and

accessories; accordingly, STIHL cannot warrant

for the use of those parts.
Original STIHL spare parts and original STIHL

accessories are available from STIHL dealers.

19 Disposal

19.1

Disposing of Blower

Contact the local authorities or your STIHL

dealer for information on disposal.
Improper disposal can be harmful to health and

pollute the environment.

17 Specifications

English

0458-812-0121-B

15

Summary of Contents for BGA 200





















Reviews: