14
English / USA
BC-KM
Aligning the Drive Tube
:
Line up the gearbox on the drive
tube so that the deflector (
6
) and the
rotor blades (
7
) are vertical and the
fixing lug (
see arrow
) on the drive
tube (
2
) points up.
:
Tighten down the clamp screw
firmly
.
Make sure the gearbox and
deflector are secure – they must not
rotate on the drive tube.
:
Engage lug (
1
) on drive tube in
slot (
2
) in the coupling sleeve and
push home the drive tube as far as
stop.
:
When correctly installed, the red
line (
3
) (arrow point) must be flush
with the end of the coupling sleeve.
:
Tighten the wing screw (
4
)
firmly
.
Reverse the above sequence to remove
the drive tube.
Shoulder strap and full harness
*
:
Put on the shoulder strap or harness
(1)
.
:
Adjust length until the springhook
(2)
is at about the height of your
right hip with the unit attached.
*
see “Guide to Using this Manual”
6
7
2
381BA028 KN
Mounting the CombiTool
002BA132 KN
1
2
4
3
002BA133 KN
Fitting the Harness
1
402BA009 KN
2
