► Detach retaining pin (4) and remove pin (5).
The ridger (2) can be removed.
► Insert blade spur (6) into adapter (7) from
below so the bores align.
► Insert pin (5).
► Push retaining pin (4) through the bore in
pin (5).
The blade spur is secured.
8
Working with the Ridger
8.1
Adjusting the Swivel Range
The swivel range of the ridger can be adjusted.
► Stop the engine.
► Place the tiller on a level surface.
► Loosen lock nuts (1).
► Screw in screws (2) by turning clockwise.
► Tighten lock nuts (1) firmly.
The swivel range is decreased.
► Loosen lock nuts (1).
► Unscrew screws (2) by turning anti-clockwise.
► Tighten lock nuts (1) firmly.
The swivel range is increased.
8.2
Adjusting the Working Angle
The working angle of the ridger can be adjusted.
► Stop the engine.
► Place the tiller on a level surface.
► Loosen lock nuts (1).
► Loosen screw (2).
► Unscrew screw (3) by turning anti-clockwise.
► Tighten screw (2) so bracket (4) is locked in
place.
► Tighten lock nuts (1) firmly.
The working angle is decreased.
► Loosen lock nuts (1).
► Loosen screw (2).
► Screw in screw (3) by turning clockwise.
► Tighten screw (2) so bracket (4) is locked in
place.
English
8 Working with the Ridger
14
0478-906-9911-B
