![background image](http://html1.mh-extra.com/html/stihl/4813/4813_instruction-manual_1378580027.webp)
6
Mounting the Gearbox
2
3
277BA007 KN
1
1
4
► Loosen the clamp screws (1)
► Line up the sliding sleeve (2) – it must be in
line with the opening in the angle drive
► Push the gearbox (3) onto the drive tube (4),
turn the gearbox back and forth as necessary
3
5
277BA027 KN
► Once the end of the drive tube is inserted
beyond the slot in the clamp (5), push the
gearbox fully home
► Screw in the clamping screws as far as possi‐
ble
► Align the gear unit (3)
► Tighten clamping screws
7
Adjusting the Cutter Bar
7.1
Adjustment mechanism 125°
277BA016 KN
In this version, the angle of the cutting bar rela‐
tive to the shaft is adjustable from 0° (completely
straight) to 45° (in 4 stages upward) and to 80°
(in 7 stages downward). Twelve individually
adjustable working positions are possible.
Additionally, the cutting bar can be set to a
defined transport position.
6 Mounting the Gearbox
English
0458-277-9621-B
27