![background image](http://html1.mh-extra.com/html/stihl/4137-series/4137-series_manual_1379216025.webp)
24
Series 4137 Components - HT
:
Install the retaining ring (gap
must face clamp screw) so that it
engages the slots (arrow) in the
fan housing.
Install all other parts in the reverse
sequence.
VA
936RA242
:
Push home the drive tube until
the holes line up.
– Tighten down the fixing screw
and clamp screw firmly,
VA
936RA243
To avoid the risk of electrocution, do
not start the engine while the control
handle is exposed.
:
Take the screws out of the outer
half of the handle molding.
– Remove the handle molding.
VA
936RA119
:
Carefully remove the rivet
(interlock lever) from the outer
handle molding.
VA
936RA121
:
Remove the interlock lever from
the pivot.
VA
936RA122
:
Remove the torsion spring from
its pivot (arrow).
VA
936RA123
:
Take out the clamp screws.
– Remove the inner handle
molding from the drive tube.
VA
936RA124
8.
Throttle Control
8.1
Control Handle up to 1997
8.1.1
Throttle Trigger / Interlock Lever