10.
With
at least two adults
, repeat
Steps 7-9
for other table top assembly.
9.
Attach Linkages (#16) to Leg (#19) as shown in
Figure 6
. Pivot Leg (#19)
out
from the table top and pivot both linkages (#16) up and align hole in
Linkage with hole in Leg (#19). Attach Linkage (#16) to Leg (#19) using
Hex Head Bolt (#29), Spacer (#37) and Locknut (#34). Spacer (#37) goes
between Linkage and Leg. Attach other Linkage to Leg the same way.
Tighten nuts securely.
34
29
HARDWARE NEEDED
1/4-20 Locknut
(Qty. 2)
29
16
16
34
34
21
5
17
17
Spacer goes between
Linkage Arm (#16) and
Leg (#19)
37
16
19
29
5
37
8.
Secure U-support tube (#21) to Strut Tubes (#17) with two Screws (#5) as
shown in
Figure 6
. Align holes in U-support with holes in Strut Tubes and
thread screw (#5) into hole in Strut Tube (#17). Tighten screws all the way
but be careful not to over tighten as you could strip threads on screws.
Note
: Make sure
to install #5
screws
Note
: Make sure
to install #5
screws
DO NOT OPEN THE TABLE TO PLAYING
POSITION UNTIL BOTH TOPS ARE
INSTALLED! DO NOT LEAVE TABLE
STANDING UNATTENDED. IT COULD BE
KNOCKED OVER CAUSING SERIOUS
BODILY INJURY OR PROPERTY DAMAGE.
37
5
1/4-20 X 2 3/4 Hex Head Bolt
(Qty. 2)
3/8" Long Spacer
(Qty. 2)
#8 X 9/16
Screw
(Qty. 2)
9
6
Figure
