Figure 3
21
22
35
If you want to see a video on how to insert Screw (#35) go to:
http://www.escaladesports.com/customer-service/videos.html
Or
Scan with your smartphone:
4
21
4.
Rotate U-support (#21) that is on bottom of Table Top until you see the screw holes in the slots of U-
clips (#22). If necessary Slide U-support (#21)
side to side and back and forth to see holes
.
See
Figure 3
&
Detail A
.
5.
Insert Screw (#35) through slot in U-clip (#22) and into U-support (#21). See
Figure 3
&
Detail A
. Thread screw all the way into U-support until it touches the back of the tube. There
should be about 3/8 of screw (#35) left sticking out. Repeat for second Screw (#35) and U
Clip (#22).
Note:
To aid in assembly you can use a cordless drill and Phillips bit.
Wear safety glasses
.
3.
Lay Table Top (#1) painted side down, on a smooth, flat surface. Use the shipping container
to protect the painted surface of table top.
1
Note: Slide U-Support back and forth
until you see the hole if necessary.
6. Repeat steps 3-5 on other table top assembly.
Detail A
