7
User’s manual
EN
TECHNICAL INFORMATION
GENERAL DESCRIPTION OF THE APPLIANCE
The appliance is a robot designed and built to
automatically cut grass in gardens and lawns
at any time of the day. It is small, compact,
silent and easy to transport.
Depending on the characteristics of the
surface to mow, the robot can be programmed
to mow several areas: a primary area and
then secondary areas (based on the model).
During operation, the robot mows the area
delimited by the perimeter wire.
When the robot detects the perimeter wire or
encounters an obstacle with a height above
10 cm
(3.94 in.), it changes direction in a
random manner and starts mowing again in
a new direction.
Based on its operating principle (“random”),
the robot automatically mows the entire
delimited area of the lawn (see fi gure).
The lawn surfaces that the robot can mow
depend on a series of factors, such as:
• model of the robot and type of batteries
installed
• characteristics of the area (irregular
perimeters, uneven surfaces, divided
areas, etc.)
• characteristics of the lawn (type and height
of the grass, moisture, etc.)
• conditions of the blade (level of sharpness,
without residuals or encrustations, etc.)
RANDOM OPERATION
All the models are equipped with a sensor that, in case of rain, stops the blade and returns the
robot to the charging station. On request, the models can be equipped with upgraded transmit-
ter, power supply safety box and electronic alarm. For more details, refer to the Technical Spe-
cifi cations. Each robot comes with its own recognition password to prevent it from being used
if stolen. At the time of purchase, the password entered by the manufacturer consists of four
numbers (0000). To personalise the password see “Programming Mode” (Password function).
