EN - 11
1. Remove wrap and packaging materials
from unit.
2. Remove unit from shipping container.
3. Remove hardware from negative (-)
battery cable, but DO NOT discard.
4. Secure negative (-) battery cable to
negative (-) battery terminal with
hardware removed in step 3.
5. Return seat to operating position. See
6. Remove two bolts, two nuts, one washer
and one spacer from each side of
discharge chute bracket. See Figure 3.
7. Rotate discharge chute 180 degrees. See
8. Place the discharge chute in the
operating position. Ensure holes are
aligned. See Figure 5.
ASSEMBLY
WARNING:
AVOID INJURY.
Read and understand the
section before
proceeding.
Figure 2
Figure 3
Figure 4
