6
| SHZ S (GB)
www.stiebel-eltron.com
INSTALLATION
Safety
INSTALLATION
7. Safety
Only a qualified contractor should carry out installation, commis-
sioning, maintenance and repair of the appliance.
7.1 General safety instructions
We guarantee trouble-free function and operational reliability
only if the original accessories and spare parts intended for the
appliance are used.
7.2 Instructions, standards and regulations
Note
Observe all applicable national and regional regulations
and instructions.
8. Appliance description
8.1 Standard delivery
Delivered with the appliance:
- Mounting bracket (2 pce for appliances with a 150 l nominal
capacity)
- 5 mm spacer (2 pce for above, 2 pce for below)
- Installation template
- Safety assembly
- Expansion vessel, 8 litre
- Bracket
- Tundish
8.2 Accessories
Depending on the static pressure, various safety assemblies and
pressure reducing valves are available. These type-tested safety
assemblies protect the appliance against unacceptable excess
pressure.
Pressure-tested taps are available as accessories.
9. Preparations
9.1 Installation site
The appliance is exclusively designed for installation on a solid
wall. Ensure the wall offers adequate load bearing capacity.
Always install the appliance vertically in a room free from the risk
of frost and near the draw-off point.
9.2 Wall mounting bracket
f
f
You can use the installation template to transfer the dimen-
sions to the wall.
f
f
Drill the holes and secure the wall mounting bracket with
screws and rawl plugs. Select fixing materials in accordance
with the wall construction/condition.
You can compensate for unevenness in the wall with the spacers
provided.
2 mounting brackets are required for appliances with 150 l nomi-
nal capacity.
26
�0
2�
01
�0
57
2
2
1
1 Lower spacer
2 Upper spacer
9.3 Preparing the power cable
270
120
D
00000
42
05
2
