OpERatIOn | InStallatIOn
Operation
www.stiebel-eltron.com
MEK | MED |MEB|
11
EN
GL
ISH
1.3 units of measurement
Note
All measurements are given in mm unless stated oth-
erwise.
2. operation
Note
When the water in the water heater is being heated, ex-
pansion water will drip from the outlet.
With non-pressurised water heaters with anti-drip func-
tion, the expansion water remains inside the water heat-
er.
To draw water, lift the lever.
To achieve the required temperature, mix the cold and hot water
by moving the lever sideways.
MEB: You can switch between spout and hand shower. For this,
pull the diverter upwards while the water is running.
The tap automatically reverts to the original position after draw-
off has ended.
D
00000
33
02
8
3. cleaning and care
f
f
Never use abrasive or corrosive cleaning agents. A damp
cloth is sufficient for cleaning and caring for the product.
f
f
For descaling, remove the aerator from the fitting.
InStallatIOn
4. safety
Only qualified contractors should carry out installation, commis-
sioning as well as maintenance and repair of the product.
4.1 general safety instructions
We guarantee trouble-free function and operational reliability only
if original accessories and spare parts intended for the product
are used.
WARNING Burns
During operation, the tap can reach temperatures in ex-
cess of 60 °C.
!
Material damage
Scale build-up can block the outlet and thus subject the
water heater to pressure.
f
f
Never block the spout, and use only aerators for
non-pressurised taps, otherwise the water heater
could be damaged.
4.2 instructions, standards and regulations
Note
Observe all applicable national and regional regulations
and instructions.
299485_MEK_MED_MEB_de_en_fr_nl_pl.indb 11
27.02.2013 13:53:48
