EN
GL
ISH
INSTALLATIoN
Cleaning and care
WST-W | TWS 2 | AHu 50
| 17
TWS 2, AHu 50
1
4
2
3
D
00000
72
34
4
1 Pivoting spout with aerator
2 Draw-off valve
3 Temperature regulating tap head
4 Tap body with eyelet for plug chain
f
f
Adjust the tap head to the required temperature. Open the
draw-off valve.
4. Cleaning and care
f
f
Never use abrasive or corrosive cleaning agents. Use only a
small amount of soap and a damp cloth to clean the tap.
f
f
To prevent limescale, dry the tap after every use.
f
f
For descaling, remove the aerator from the fitting.
INSTALLATION
5. Safety
Only qualified contractors should carry out installation, commis-
sioning as well as maintenance and repair of the product.
5.1 General safety instructions
We guarantee trouble-free function and operational reliability only
if original accessories and spare parts intended for the appliance
are used.
WARNING Burns
During operation, the tap can reach temperatures in ex-
cess of 60 °C.
There is a risk of scalding at outlet temperatures in ex-
cess of 43 °C.
!
Material losses
Scale build-up can block the outlet and thus subject the
water heater to pressure.
f
f
Never block the tap outlet and use only aerators for
non-pressurised taps, otherwise the water heater
will be damaged.