![background image](http://html1.mh-extra.com/html/stiebel-eltron/718009700000/718009700000_operation-and-installation_1376785045.webp)
45
EN
Where to install your device?
-
This equipment was designed to be installed in a residence. Please ask
your distributor before using it for any other purpose.
-
The device should be installed according to normal trade practice and
incompliance with legislation in the relevant country (NFC 15-100 for
)UDQFH
-
The equipment is class 2 and is protected against splashed water IP 24.
The device can be installed in volume 2 of a bathroom It’s forbidden
to install the device in the volume 1. The device is to be installed so
that switches and other controls cannot be touched by a person in
the bath or shower.
Do not install the device :
-
,Q D GUDXJKW WKDW PLJKW DIIHFW DGMXVWPHQW IRU
example, under a central mechanical ventilation
XQLWHWF
-
8QGHUDÀ[HGSRZHUVRFNHWRUQHDUFXUWDLQVRU
other combustible materials.
Volume 1
No electrical device
Volume 2
Electrical device IPX4 .
(Standard EN 60335-2-
$
> 250 mm
> 250 mm
> 200 mm
> 150 mm
/RFDWH WKH GHYLFH ZLWKLQ PLQLPXP
distances from obstacles.
Do not install shelf above the device.
The bottom case must be at least 5
mm from the wall.
In order to avoid a hazard for very
young children, this device should be
installed so that the lowest heated rail
LVDWOHDVWPPDERYHWKHÁRRU
INSTALLING THE DEVICE
Installation