![background image](http://html1.mh-extra.com/html/stiebel-eltron/233307/233307_installation-manual_1376760008.webp)
8 | WPSF
ContEntS | InStallatIon
General information
InstallatIon
1.
General information ������������������������� 2
1.1
other symbols in this documentation ������������ 2
1.2
Units of measurement ������������������������ 2
2.
Safety ������������������������������������� 2
2.1
General safety instructions ��������������������� 2
2.2
Instructions, standards and regulations ���������� 2
2.3
Intended use �������������������������������� 2
3.
Product description �������������������������� 3
3.1
Standard delivery ���������������������������� 3
4.
Installation ��������������������������������� 3
4.1
Charging the heat source system ���������������� 3
4.2
Removing the strainer ������������������������ 3
5.
Maintenance �������������������������������� 3
6.
Specification �������������������������������� 4
6.1
Dimensions and connections ������������������� 4
6.2
Pressure drop diagram ������������������������ 4
6.3
Data table ���������������������������������� 4
Guarantee
enVIronment and recyclInG
InStallatIon
1. General information
the chapter "Installation" is intended for qualified contractors.
1.1 other symbols in this documentation
Note
General information is identified by the symbol shown
on the left.
f
f
Read these texts carefully.
Symbol
Meaning
Material losses
(appliance and consequential losses, environmental
pollution)
appliance disposal
f
f
this symbol indicates that you have to do something. the
action you need to take is described step by step.
1.2 units of measurement
Note
all measurements are given in mm unless stated oth-
erwise.
2. safety
only a qualified contractor should carry out installation, com-
missioning, maintenance and repair of the appliance.
2.1 General safety instructions
We guarantee trouble-free function and operational reliability
only if original accessories and spare parts intended for the
appliance are used.
2.2 Instructions, standards and regulations
Note
observe all applicable national and regional regula-
tions and instructions.
2.3 Intended use
the brine charging unit is a multi-function valve with safety
valve, quick-action air vent valve and pressure gauge for filling
and filtering brine-based fluids.
any other use beyond that described shall be deemed inap-
propriate. observation of these instructions and of instructions
for any accessories used is also part of the correct use of this
appliance.
!
Summary of Contents for 233307
Page 5: ...deutsch WPSF 5 Notizen...
Page 31: ...WPSF 31...