STI RTQ Series, Instruction Manual, Page: 6 / 44

STI S.r.l. – Via Dei Caravaggi 15, 24040 Levate (BG) – ITALY www.imi-critical.com
Manual 5300, rev. 09 06/2020 – RTQS
2
1.6 Applicable Standards and Directives
1.6.1 General Standards
- EN ISO 12100:2010: Safety of machinery - General principles for design.
Risk assessment and risk reduction.
- IEC 61508-1/7 (Ed. 2010)
- IEC 61511-1 (Ed. 2016)
1.6.2 European Directives (mandatory only for installations in EU Countries)
- 2006/42/EC Machinery Directive.
- 2014/68/EU Pressure Equipments Directive (PED)
- 2014/35/EU Directive for Low Voltage Equipment (LV)**
- 2014/30/EU Directive relating to the Electromagnetic Compatibility (EMC)**
- 2014/34/EU Directive concerning equipment for use in potentially explosive atmospheres (ATEX)
** Applicable only when electrical control panel is supplied integrate with the actuator
1.7 Symbology Used
1.7.1 Signs of warning
Be careful where these symbols are shown, they indicate a potentially hazardous situation and they warn
that if the steps are not properly performed, MAY RESULT CAUSING serious injury, death or long-term
risks to the health of exposed persons.
1.7.2 Sings of obbligation
General
obligation (with
the possible
supplementary
signboard)
Must wear
protective
clothing.
Obligation to
wear
protective
footwear.
Is required to
wear a helmet.
Is required to
protect the
eyes.
Obligation to
protect your
hearing.
GENERAL DANGER DANGER POWER SUPPLY CRUSHING HAZARD