manualshive.com logo in svg

STI RTQ Series, Instruction Manual, Page: 5 / 44

Share
Download
STI RTQ Series Instruction Manual Download Page 5

 

STI S.r.l. – Via Dei Caravaggi 15, 24040 Levate (BG) – ITALY        

 www.imi-critical.com 

 
Manual 5300, rev. 09     06/2020 – RTQS 

 

1 

1 

GENERAL INFORMATION 

1.1  General Warnings 

Important 

 

This Instruction Manual is an integral part of the machine, it should be carefully 
read before carrying out any operation and it should be kept for future references. 
This  Instruction  Manual  covers  the  RTQS  actuators  in  the  base  version  without 
any accessories and/or control panel. 
In case accessories and/or control panel are foreseen mounted on the actuator an 
additional  Section  to  this  Instruction  Manual  will  be  attached  to  the  specific 
actuator.    
This Instruction Manual is realized in accordance with the Directive 2006/42/CE. 
When  the  actuators  are  used  for  safety  application  with  required  SIL  level  (IEC 
61508/61511) please refer also to the specific safety manual. 

1.2  Generalities 

STI  S.r.l.  actuators  are  conceived,  manufactured  and  controlled  according  to  the  Quality  Control  System  in 
compliance with EN ISO 9001 International Standard. 
 

1.3  Manufacturer 

With respect to Machinery Directive 2006/42/EC the Manufacturer of the described RTQS actuator series, is STI 
S.r.l. as specified on the machinery nameplate. 
 

STI S.r.l. Via Dei Caravaggi 15 
24040 Levate (BG) Italy 
Tel. +39 035 2928.2 
Fax +39 035 2928.247 

[email protected] 

1.4  Terms and conditions  

STI S.r.l. guarantees each single product to be free from defects and to conform to current goods specifications. 
The warranty period is one year from the date of installation by the first user, or eighteen months from the date of 
shipment to the first user, whichever occurs first. 
The warranty does not cover special products or components not covered by warranty in their turn by 
subcontractors. No warranty is given for products which have been subject to improper storage, improper 
installation, misuse, or corrosion, or which have been modified or repaired by unauthorised personnel. Repair 
work due to improper use will be charged at standard rates. 
 

1.5  Manufacturer’s Liability  

STI S.r.l. declines all liability in the event of:  
- 

use of the actuator in contravention of local safety at work legislation  

- 

incorrect installation, disregard or incorrect application of the instructions provided on the actuator nameplate 
and in this manual  

- 

modifications without STI’s authorisation  

- 

work done on the unit by unqualified or unsuitable persons. 

 

Summary of Contents for RTQ Series













































Reviews:

No comments